Now available! - Twelve Days of Christmas Earrings Volume 5 with 12 all-new designs.

Now available! - Twelve Days of Christmas Earrings Volume 5 with 12 all-new designs.
Get ready for the Christmas Party season and make yourself some sparkly festive earrings. Christmas Trees, snowflakes, ornaments and stars - these are just a few of the fabulous earrings in this Volume

Monday, October 26, 2015

Bridesmaid's Jewellery - Baroque-Style Earrings

In the last two posts, I shared the bracelets the Creative Bride gave to her bridesmaids. To complete their outfits, she also gave them matching baroque-style earrings.

These romantic earrings have a glowing heart captured inside the filigree and despite how ornate they look, they are a simple and easy design to put together and will take you just minutes to complete.

Here's what you'll need:
Tools:
  • Flat nose pliers
  • Chain nose pliers
  • Flush cutters
Working from the wire spool, place the last 3mm (1/8") of the wire in the jaws of the pliers and bend it at a 60° angle. This will make the first prong of a triangle jump ring.

Move the pliers to the other side of the bend you just made and bend the wire on the other side of the pliers at a 60° angle. This is the first side of the triangle.

Reposition the pliers again on the other side of the angle and bend again at 60°. This is the second side of the triangle.

Place the pliers on the other side of the angle and bend the wire at 60° to create the second prong.

Trim the wire to 2mm (1/16"). Trim the first prong to 2mm also.

 Insert one prong inside the Swarovski drop......

..... and then the other. Squeeze them together gently to secure the drop.

Attach a 3mm jump ring to the triangle.

Insert the jump ring into the bottom loop of a Tombac drop.

Place a second Tombac drop on top and close the jump ring.

The two drops should form a cage.

Open the cage out flat.

Place a heart bead inside the cage with the point facing toward the top loop.

Close the cage.

Open the loop of the earring wire and hook on the two Tombac drops.

Make the second earring to match. So elegant and so easy!

Here's the completed ensemble that each of the bridesmaids wore: bracelet, earrings, faux fur wrap and bouquet.

The next instalment in the Wedding Collection will be the Creative Bride's jewellery so don't forget to check back to see it.

'Til then.....


Tuesday, October 20, 2015

Bridesmaid Jewellery - Baroque Style - Part 2

Now that you've made your beautiful epoxy resin and crystal focal, it's time to turn it into an elegant baroque-style bridesmaid bracelet. If you missed how to make the focal, visit Part 1 for a list of all the materials required to make the bracelet and the step-by-step instructions on how to create the jewelled focal.


For this part of the design, you'll need the following tools:
Drill a hole approximately 1mm (1/32") from the bottom edge of the smallest tier of each connector (opposite the bow end). The metal is thick and you need to use a diamond drill bit to cut through it.


To make the bracelet sit nicely, round the connectors by placing them around a small cylindrical object like a bead container. Mine is 3.8cm (1.5") diameter. Use your thumbs to press the connectors against the surface at each end.

Once you have a bit of a curve, use bail making pliers to continue shaping the pieces until you are happy with the shape of the curve.

Shape them as much as you need to, to fit the wearer's wrist.

Place a flat bicone inside the 2-loop setting.

Press the claws over the crystal making sure it stays centred in the setting.

Use chain nose pliers to press the claws flush against the crystal to hold it securely. Take care not to scratch the surface of the crystal. Make a second crystal link.

Use a jump ring to attatch a crystal to the hole you just drilled in one of the connectors. Repeat for the second connector and crystal link.

Working on one side at a time, attach the focal to a bow connector by opening the loops of the eye pins in the focal and hooking them through the bow connector. Repeat on the other side of the bracelet. Lengthen or shorten the bracelet by adding or removing the crystal links.

Attach one half of the fold over clasp to each end of the bracelet.

The finished design - a Baroque-style bracelet with a rich jewel focal. The raw brass filigree gives the piece a vintage feel, adding to the romantic, elegant look of the bracelet..... just what the Creative Bride was looking for.

In my next post, I'll show you how to make the matching earrings.

'Til then.....


Monday, October 19, 2015

Bridesmaid Jewellery - Baroque Style Bracelet - Part 1

Today, the Wedding Collection takes a look at the jewellery worn by the bridal party.

"Romantic and elegant" was the brief the Creative Bride gave me. She has chosen the mismatched look for her bridal party so each of her attendant's will wear a different shade of burgundy in a different style.

It's a broad brief but armed with information about what the bridesmaid's will wear, I had a starting point. With four different necklines, necklaces were ruled out. We toyed with the idea of a brooch but Michaela wanted to surprise her attendants with a faux fur wrap in case the day was chilly. So instead, we settled on a bracelet and pair of earrings for each bridesmaid. Now it was up to me to create something romantic and elegant. And what could be more elegant than crystals and gold filigree. So today, let's take a look at the bracelet.

There are a lot of steps in this project so I've split it into 2 posts. This first part deals with creating the epoxy resin and crystal focal. Part 2 shows how to put the bracelet together.

Here's what you'll need:
Tools and Equipment
  • Soft paint brush
  • Drill with grinding/abrasive bit and 1mm drill bit
  • Flat nose plier 
  • Round nose plier
  • Flush cutter
  • Button shank remover
  • Embellie Gellie or other tool to help with placement of small crystals
  • Methylated spirits (denatured alcohol) and a cotton bud
Using the button shank remover, cut away the 4 claws on the marquis setting.

Fit a grinding bit to the drill and file the cut edges smooth.

They should be flush with the upper edge of the setting.

 Trim away the pendant loop on the brass filigree using a button shank remover.....

and then the internal loop.

Trim away all the filigree from the inner oval. This is so the oval crystal will fit.

File the cut edges smooth.

Expand the sides of the marquis setting to fit the oval filigree.

Check it for fit and make any further adjustments if necessary.

Insert an eye pin through one side of the setting and out the other. Bend the eye pin at a 90° angle and trim to 8mm (5/16").

Turn a simple loop.

Repeat with a second eye pin through the other two holes.

I'm using ETI's EnviroTex Jewelry Clay to fill the marquis setting. Measure out equal parts of A and B.

Put on a pair of gloves and mix the two parts together following the manufacturer's instructions until it's completely mixed.

Add some gold PearlEx powder to tint the resin and mix it in well. This step is optional as you can colour the surface of the clay when the piece is finished.

Shape the Jewelry Clay into a pointed oval and place it into the setting. Make sure the face of the eye pin loops face upwards.

Work the resin clay out to the edges and leave it domed in the centre.

Place the filigree on top of the Jewelry Clay and press it into the surface.

Position the oval crystal in the centre and press it down so that its girdle is level with the clay.

Place the small Swarovski crystals in the open areas of the filigree. I prefer to use pointy backs (aka V-backs, diamond backs and chatons) but to get the colour I needed, I had to settle for flatbacks. These will be just as secure because EnviroTex Jewelry Clay is an excellent adhesive.

Dust the surface of the resin clay with Pearl Ex. Don't worry if you get it on the crystals as you can brush it off.

Sometimes, no matter how careful you are, residue from the clay gets on the surface of the crystals. If this happens, clean it off with a cotton bud dipped in methylated spirits. You need to wipe it off before the clay goes off or it will be permanent.

Set the focal aside to cure for 24 hours before putting the bracelet together.

In my next post, we'll be using the remaining components to create the bracelet.

'Til then.....

 

LinkWithin

Blog Widget by LinkWithin